Anchoring and shoring

For a safe installation, don’t forget to add anchoring and shoring features to your hoist order.
The type and quantity of anchoring and shoring systems are determined by the worksite configuration.
Inclined or vertical, the headboard must always be supported and secured to the building/scaffolding through the use of bolts, ropes, straps or chains, in order to ensure the stability of the equipment and avoid all risk of accidental collapse. As well, the ladder base must always be secured to the ground through the use of steel rods or bolts, through the holes in the support beam.

In the instructions section you will find the anchoring and shoring regulations.

For oblique shoring of a Castor Steel hoist
For anchorage of a Castor Steel hoist
To tighten on a square tube
To grip against a scaffolding tube
For support at right angle in front of a window
For perpendicular support facing a terrace
Accessory for base ladder prop
Shoring trestle for hoist
Pair of props for hoist shoring
For oblique shoring of Castor Steel hoist
To anchor a Castor Steel hoist against a façade
To anchor a Castor Steel hoist against the frontage
For oblique shoring of a Maxial hoist
To support an hoist on a frontage or a scaffolding
To install a hoist vertically against a façade
To install a hoist vertically against a façade
Coupler for vertical anchoring of a hoist
Adjustable coupler for vertical anchoring of a hoist
2 m pipe for fix a hoist against a scaffolding